XF (X250) V8-4.2L (2009)
Tighten to 70 Nm.
20. CAUTION: The final tightening of the suspension components must be carried out with the vehicle on its wheels.
NOTE: Left-hand shown, right-hand similar.
Tighten the front lower arm retaining nut and bolt.
-
Tighten to 175 Nm.
21. CAUTION: The final tightening of the suspension components must be carried out with the vehicle on its wheels.
NOTE: Left-hand shown, right-hand similar.
Tighten the rear lower arm retaining nut and bolt.
-
Tighten to 175 Nm.
22. Remove the special tool.