XF (X250) V8-4.2L (2009)
INSTALL NEW WAIST FINISHERS AND MIRROR GASKETS
NOTE:
The Repair Procedure must be carried out on both sides of the vehicle.
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows:
GTR Home > NAS > X250 - XF > Service Information > 2009 > Workshop Manual
1. Refer to Workshop Manual (GTR) section 501-09 and remove the left front door mirror.
2. Remove waist finisher.
3. Install new waist finisher. (Figure 1)
4. Remove mirror gasket.
NOTE:
Ensure mirror and gaskets are correctly seated and not deformed or crushed.
5. Install new mirror gasket. (Figure 2)
6. Refer to Workshop Manual (GTR) section 501-09 and install the left front door mirror.