XF (X250) V8-5.0L SC (2010)
3. Remove the heatshield: (Figure 1)
^ Remove the four bolts.
4. Install the new heatshield (XR852227): (Figure 2)
^ Install the two bolts only.
^ Tighten bolts to 7 Nm (5lbf ft).
5. Refer to Workshop Manual section 309-00C: Exhaust System - 5.0L NA V8-AJ133 / 5.0L SC V8-AJ133 > Removal and Installation > Front Muffler,
and install the front muffler.
6. Refer to Workshop Manual section 100-02: Jacking and Lifting > Description and Operation > Lifting, and lower the vehicle.
RESEAL REAR WINDSHIELD
1. Open the luggage compartment lid.
2. Release the luggage compartment lid seal. (Figure 3)