XJ-12 (X300) V12-6.0L (1995)
Carpet: Customer Interest
Interior - Floor Mat Interference with Drivers Seat
13-16
DATE: 2/96
Sedan Range
Floor Mat - Interference with Driver's Seat
- Installation Procedure
MODEL
1995 MY
Sedan Range
VIN
720001-ON
ISSUE:
A condition may occur where the driver's seat cuts into the accessory floor mat, due to incorrect installation, especially after the mat is removed for
cleaning and is then reinstalled.
ACTION:
Use the following technique when reinstalling the mat to prevent buckling of the mat resulting in interference with the seat mechanism.
Advise any personnel involved in the cleaning or detailing of vehicles of this procedure. In the event of a customer concern, the procedure can also be
demonstrated to the customer.
REINSTALLING FLOOR MAT
1.
Roll mat up toward grommet. Align and lock the half-turn fastener.
2.
Roll the mat away from the fastener until the mat lies flat on the floor.
WARRANTY POLICY:
Any floor mats damaged as a result of improper installation are not covered under warranty.