XJ-12 (X300) V12-6.0L (1995)
Console: Service and Repair
Radio Console
Fig. 1
-
Remove the battery cover. Disconnect the battery.
-
Remove the console ashtray.
-
Remove console veneer panel.
-
Remove the gear selector ident plate securing screws.
-
Carefully reposition the radio console assembly from the mounted position.
-
Disconnect the assembly harness multi-plugs.
-
Disconnect the antenna co-axial connector.
-
Undo and remove the ground lead to radio securing nut.
-
Reposition the ground lead from radio stud.
-
Disconnect the radio harness multi-plugs.
-
Reposition the radio harness from the center console.
-
Displace the radio console assembly.
-
Remove the radio assembly from the console.
-
Remove the radio retaining plate.
-
Undo and remove the air conditioning control module securing screws.
-
Displace and remove the module.
-
Undo and remove switch/clock module securing screws.
-
Displace and remove the module assembly.
-
Place the radio console (Fig.1) aside.
Refit in the reverse order of the removal procedure.