jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

All Technical Service Bulletins for Brake Pedal Assy:|12_02 > < Brake Pedal - Inconsistent Return|Page 4895
Page 6
background image

66.

Adjust the out throttle cable or adjust the traction control primary outer cable.

67.

Place a rag under the union nuts of the brake lines leading to the brake master cylinder.

68.

Reconnect the brake lines to the brake master cylinder. Remove and discard the rag.

69.

Reconnect the in-car temperature sensor connector.

70.

Reinstall the passenger footwell duct and the dash liner.

71.

Raise the vehicle on a suitable lift.

72.

Bleed the brake system (refer to section 12 in the XJ6-XJ12 Vehicle Service Manual.)

73.

Lower the vehicle.

74.

Reinstall the left side cover.

75.

Ensure that the complaint is repaired.

All Technical Service Bulletins for Brake Pedal Assy:|12_02 > < Brake Pedal - Inconsistent Return|Page 4895