XJ-12 (X300) V12-6.0L (1995)
/v12-6.0l/Page-1782002.png)
SERVICE PORT LOCATIONS - ALL 1995 MV SEDAN RANGE VEHICLES
^ Torque the pressure cutout switches to 3.5 - 6 lb.ft. (5 - 8 N-m). Do not exceed 6 lb.ft.
WARNING:
DO NOT EXCEED 6 lb.ft. [8 N-m) TORQUE WHEN TIGHTENING PRESSURE CUTOUT SWITCHES. Overtightening will result in
failure of the Schrader valve causing liquid refrigerant to be discharged when the switch is removed.
VIN 720580 ON - SCHRADER VALVES
^
It is not necessary to depressurize the system on these vehicles when removing the dual (binary) or triple (trinary) pressure cutout switches.
^
Torque the pressure cutout switches to 3.5 - 6 lb.ft (5 - 8 N-m). Do not exceed 6 lb.ft.
