XJ-12 (X300) V12-6.0L (1995)
Displace and remove the electronics pack from the instrument pack by lifting it from its hinges. Displace and remove all warning bulbs; bayonet
fining, twist 1/8th turn anti-clockwise to release.
Note: There are two different types of colored bulb holders, each type must be returned to the correct location.
Disconnect the flexible printed circuit to LCD multi-plug.
Carefully reposition the flexible circuit board to allow access to the LCD securing screws.
Fig 3
Remove the LCD unit securing screws and remove the unit (Fig. 3).
The renewal of the LCD unit is a reversal of the removal procedure.
Note: On re-connection of the battery, it is important that the ignition is cycled and the bulb check is completed. The odometer reading will then be
restored to the correct value.