XJ-12 (X300) V12-6.0L (1995)
Vehicle Lifting: Service and Repair
Workshop Jacks
Front - One Wheel
Fig. 1
Position the jack under the lower spring support pan (Fig. 1), using a wooden block placed between the jack head and the spring support pan. Place an
axle stand in position at the adjacent jacking point when the wheel has been raised.
Front - Both Wheels
Fig. 2
Position the jack centrally under the front cross member (Fig. 2), using a wooden block placed between the jack head and the crossmember. Place axle
stands under both front jacking points when the vehicle has been raised.
Rear - Both Wheels