XJ-12 (X300) V12-6.0L (1995)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION SENSOR (CKP)
Fig. 2
Remove
-
Open the trunk and remove the battery cover.
-
Disconnect the battery earth lead.
-
Raise the vehicle.
-
Disconnect the CKP harness multiplug.
-
Undo and remove the CKP sensor securing bolt.
-
Remove the sensor along with the crankshaft pulley TDC bracket.
Refit
-
Fitting a new CKP sensor is the reverse of the removal procedure.
Fig. 1 Characteristic
Additional Information