XJ-12 (X300) V12-6.0L (1995)
Manifold Pressure/Vacuum Sensor: Service and Repair
Fig. 1
Remove
-
Open the hood and fit a wing cover.
-
Open the trunk and remove the battery coven
-
Disconnect the battery earth lead.
-
Disconnect the MAP sensor vacuum hose (1 Fig 1).
-
Disconnect the MAP sensor harness multi-plug (2 Fig. 1).
-
Release bolts (3 Fig. 1) securing MAP sensor to mounting bracket and remove sensor.
Refit
-
Fitting a new MAP sensor is the reverse of the removal procedure.