XJ-12 (X300) V12-6.0L (1995)
Oil Pressure Sender: Service and Repair
OIL PRESSURE TRANSMITTER - 12 CYL.
RENEW
Disconnect the battery earth lead.
Open the bonnet and fit wing protection covers.
Remove the flywheel sensor / oxygen sensor multi-plug support bracket to throttle pulley mounting bracket securing bolts.
Reposition the flywheel sensor / oxygen sensor multi-plug support bracket for access to the oil pressure transmitter.
Disconnect the oil pressure transmitter lucar connector.
Remove the oil pressure transmitter.
Thoroughly clean the transmitter mating face.
Note: Ensure a new copper washer is fitted to the transmitter.
Fit and torque tighten a new oil pressure transmitter.
Connect the lucar connector to the transmitter.
Align the flywheel sensor / oxygen sensor multi-plug support bracket to throttle pulley mounting bracket bolt holes.
Fit and tighten the bracket bolts.
Remove the wing protection covers and close the bonnet.
Connect the battery earth lead.