jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Steering Column - Squeaks & Rattles|Page 4372 > < Transmission - Knock or Squeak|Page 4361
Page 1
background image

Firewall: All Technical Service Bulletins
Steering Column - Squeaks & Rattles

19.6-07

DATE
5/97

Sedan Range

MODEL 
1995 MY Sedan Range

VIN
720001-743506

Squeaks & Rattles - Noise From Fascia - Movement of Steering Column Upper Bracket

ISSUE:

Some 1995 MY Sedan Range vehicles within the above VIN range may exhibit a noise that appears to come from the instrument area. The noise may be
caused by movement of the steering column upper bracket against the plenum stiffener, Illustration 1, and the surface of the plenum.

The upper mounting bracket can move if it is not in full contact with the surface of the plenum. Blanking plugs or excess hardened sealer can prevent full
contact thereby allowing movement.

ACTION:

In case of a complaint of noise from the instrument area, on 1995 MY Sedan Range vehicles within the above VIN range, check if the noise occurs when
applying upward and downward pressure to the steering column. If so, proceed as follows:

1.

Disconnect the negative cable of the battery.

2.

After removing the left side dash liner, remove the instrument panel.

3.

Detach the draft welting from the body flange in the area of the left side fascia closing panel. Remove the panel.

Steering Column - Squeaks & Rattles|Page 4372 > < Transmission - Knock or Squeak|Page 4361