XJ-6 L6-3.6L (1989)
Front Door Panel: Service and Repair
Lower Trim Pad, Renew
RENEW
- Disconnect vehicle battery earth.
- Open door and fit seat protectors.
- Remove armrest. See: Interior Moulding / Trim/Arm Rest/Service and Repair
- From inside door pocket, release guard lamp retainer, disconnect multiplug and remove lamp.
- Carefully prise trim pad away from the door and release from upper retainer.
- With trim pad displaced for access, disconnect loudspeaker and window lift switch multiplugs.
- Feed guard lamp harness through aperture and place trim pad on a workbench.
- Remove rear door pocket, and trim pad retainers.
- Fitting is the reversal of this procedure, noting that trim pad retainers should be checked for damage before refitting.