XJ-6 L6-3.6L (1989)
Rear Door Panel: Service and Repair
RENEW
- Open the door.
- Hold inner door handle in the open position and remove inner handle escutcheon plate blank (1, Fig. 1).
- Remove the screw (2, Fig. 1) securing the escutcheon plate (3, Fig. 1), remove the plate and gasket.
- Carefully pull the veneer panel (4, Fig. 1) to release the retaining clips.
- Remove the screws securing the retaining clip and remove the retaining clip assemblies.
- Discard the veneer panel.
- Fitting is the reversal of this procedure.
