XJ-6 L6-3.6L (1989)
Arm Rest: Service and Repair
Door Arm Rest Support
RENEW
- Disconnect vehicle battery earth.
- Open door and fit seat protectors. Remove armrest.
- Remove for access, lower trim pad. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
- Drill out rivets and remove retaining screws from front and rear armrest support brackets.
- Remove swarf and debris.
- Should body finish be damaged by the drilling process, make good with zinc rich primer and body colour.
- Fining is the reversal of this procedure.
