XJ-6 L6-3.6L (1989)
Valve Block: Service and Repair
Pressure Relief Valve
Relief Valve
REMOVAL
1.
Clean valve block and surrounding area.
2.
Reposition hoses to gain access to relief valve.
3.
Position open end wrench across valve block area of "Girling" insignia.
4.
Remove relief valve using Jaguar tool JD 176 or equivalent, while holding valve block with wrench.
INSTALLATION
1.
Reverse steps to refit.
2.
Tighten relief valve to:
15 - 18 ft lb (20 - 24 Nm)
3.
Top up reservoir.
