XJ-6 L6-4.0L (1991)
Front Crankshaft Seal: Service and Repair
Remove
Remove the spoiler/under tray to inner wheel arch cover.
Fan & Water Pump
Remove the nuts securing the torquatrol unit to the water pump (1,2).
Fan Shroud Clip
Remove the fan cowl securing clips (1) and lift out the cowl and torquatrol unit complete.
Remove the A/C drive belt.
Remove the A/C drive pulley.
Slacken the alternator drive belt adjusting nut, the link arm adjusting nut, and the alternator pivot bolt. Pivot the alternator towards the engine and
remove the drive belt.
Fit Service Tool 18G 1437 to the crankshaft pulley and tighten the securing bolts.