XJ-6 L6-4.0L (1991)
Special Tool 18G 1437
Wedge the tool against the crossmember (4).
Remove the pulley retaining bolt (1).
Remove Service Tool 18G 1437 from the pulley.
Front Crankshaft Pulley
Fit Service Tool 18G 1436 to the pulley (1) and tighten the securing bolts (2).
Tighten the center bolt, withdraw the pulley from the crankshaft and remove the tool.
Remove the woodruff key and spacer.
Front Seal Tool
Remove the old oil seal from the timing cover using Service Tool JD 128 (A).
Refit
Fit the new oil seal (piior to fitting the crank spacer) using Service Tool JD 1 29 and the crankshaft pulley bolt (B).
