XJ-6 L6-4.0L (1991)
Steering Column Lock: Technical Service Bulletins
Steering Column Lock - Replace
SECTION: 57
No: 12
STEERING COLUMN LOCK
Model:
90 - 91 MY SEDANS
Date: APRIL, 1991
KEY POINTS:
LOCK BARREL REPLACEMENT PROCEDURE
ISSUE:
Steering column lock barrel replacement procedure.
This procedure is not included in the Repair Manual or any other Service Literature.
ACTION:
^
Remove the instrument panel illumination knob.
^
Remove the steering column lower cowl. (It is not necessary to remove the top cowl).
^
Turn the key to the auxiliary position.
^
Depress the lock barrel retaining pin (Fig. 1 A) and remove the lock barrel.
NOTE:
To depress the retaining pin, use a 1/16" welding rod with a 90~ bend 1/4" from the end of the rod.
^
Insert the key into the new lock barrel assembly.
^
Align the lock barrel to the steering column lock and install the lock barrel. Make sure that the retaining peg has engaged.
^
Check the operation of the lock and install the lower cowl and the panel illumination knob.
WARRANTY INFORMATION:
Fault Code: BXY
Repair Operation Number: 57.40.29
Time Allowance: 0.10 hrs.