XJ-6 L6-4.0L (1991)
- Attach JD 124 rear engine lifting eye, fit and align Service Tool MS 53B engine support bracket (Fig 1).
- Engage the hook to the lifting eye (2.9 ENGINE ONLY).
- Disconnect Nos. 1 and 2 plug leads.
- Attach 18G 1465 rear engine lifting eye, fit and align Service Tool MS 53B engine support bracket (Fig 2).
- Engage the hook to the lifting eye (3.6 ENGINE ONLY).
- Tighten the hook nut to take the weight of the engine. Slacken off the crossmember rear mounting bolts/nuts. Remove the nuts. Do not remove the
bolts at this stage. Slacken off the mounting clamp plate securing bolts (Fig 3).
- Take the weight of the crossmember assembly on the jack.
- Finally, remove the rear mounting bolts and spacers. Remove the crossmember front mounting to chassis securing nuts (Fig 4).
