XJ-6 L6-4.0L (1991)
Fig. 2 Bearing & Oil Seal Removal
2.
Using hub press tool No. JD132-1 or equivalent, align hub assembly to press. Ensure parking brake expander is located in tool cut out.
3.
Insert hub press button tool No. JD132-2 or equivalent, into hub assembly.
Fig. 3 Rear Hub Carrier Separation
4.
Using a press, separate and remove hub from carrier.
5.
Remove press tools from hub, then remove outer hub seal and bearing with a punch.
6.
Reposition hub and remove inner hub seal and bearing with a punch.
7.
Reverse procedure to install. Tighten to specifications.