XJ-6 L6-4.2L (1983)
Coolant Reservoir: Service and Repair
Removing
- Remove the pressure cap and sealing cap.
- Remove windscreen washer reservoir and the bracket rear upper securing screw.
- Disconnect the expansion pipe from the bottom of the expansion tank and the overflow pipe from the filler neck.
- Remove expansion tank securing nut and bolt, carefully displace windscreen reservoir bracket. and lift the tank clear.
Refitting
- Carefully displace the windscreen washer reservoir and locate the expansion tank to the inner wing.
- Fit and tighten nut and bolt to secure.
- Refit the expansion pipe to the bottom of expansion tank and the overflow pipe to the filler neck.
- Fit and tighten the windscreen washer reservoir bracket securing screws.
- Refit the washer reservoir.
- Top-up cooling system.
- Refit pressure cap and sealing cap.