XJ-6 L6-4.2L (1983)
will not operate until engine water temperature reaches 40°C (103°F).
Fans will automatically be on LO speed (1st) and switch to MED 1 (2nd) speed by camshaft. Only the two lowest fan speeds are available in
the heating mode.
Camshaft turns until stopped by full heat limit switch.
Camshaft movement depends on ambient and desired temperature set at temperature selector. Therefore, depending on conditions, flap
positions will vary to meet in-car temperature requirements. All air is passed through evaporator to be dehumidified.
HIGH & LO FAN SELECTION
Except for maintaining the given fan speed selected, the system's operation still remains automatic.
FULL COOLING MODE - AUTO
Flap Positions
