XJ-6 L6-4.2L (1983)
Fuel Gauge Sender: Service and Repair
FUEL TANK SENDER
Remove and Refit
- Disconnect the battery.
- Raise the rear of the car and drain the fuel tank. Remove the wheel.
- On later cars remove the rear lamp assembly for access.
- Remove the cover-plate and disconnect the Lucar connections (1, Figs. 8 or 9).
- Using tool No. 18G 1001. rotate the locking ring anti-clockwise to clear the lugs in the tank.
- Remove the locking ring and withdraw the tank unit (2. Figs. 8 or 9).
WARNING: Tank unit seal should be replaced with a new seal every time this operation is carried out.
