XJ-6 L6-4.2L (1983)
Quarter Window Glass: Service and Repair
Removing
- Remove rear door trim casing. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
- Prise chrome trim free from quarter-light frame (1, Fig. 35).
- Prise chrome beading from base of quarter-light (2, Fig. 35).
- Remove screw securing inner chrome trim to door glass frame, prise trim from quarter-light frame (3, Fig. 35).
- Release section of door seal fitted to quarter-light frame (4, Fig. 35).
- Remove three screws securing base of quarter-light to door (5, Fig. 35).
- Lower door glass to full extent (6, Fig. 35).
- Release upper portion of felt channel fitted to quarter-light (7, Fig. 35).
- Remove screws exposed by removal of quarter-light channel (8, Fig. 35).
- Prise chrome trim from quarter-light vertical post, lift quarter-light from door (9, Fig. 35).
Refitting
- Position quarter-light in door.
- Fit chrome trim to quarter-light vertical post.
- Fit upper portion of channel to quarter-light and raise door glass.
- Refit screws to secure quarter-light.
- Refit door seal and chrome trim.
- Using suitable sealing compound, seal area between base of quarter-light and chrome beading.