XJ-6 (X300) L6-4.0L (AJ16) (1996)
Rear Door Panel: Service and Repair
Rear Door Casing Veneer Panel
Fig. 1
-
Reposition the inner door handle.
-
Remove the inner handle escutcheon plate blanking plate.
-
Undo and remove the inner handle escutcheon plate securing screw.
-
Remove the plate and gasket.
-
Carefully Undo and remove the veneer panel.
-
Undo and remove the retaining clip securing screws.
-
Remove the retaining clip assemblies.
-
Place the veneer panel (Fig.1) aside.
Refit in the reverse order of the removal procedure.