XJ-6 (X300) L6-4.0L (AJ16) (1996)
Trunk / Liftgate Lock Cylinder: Service and Repair
Fig. 1
-
Open the trunk and remove the mechanism cover.
-
Disconnect the operating rod from the remote linkage.
-
Remove the two lock assembly securing bolts, remove the lock from the trunk lid and remove the assembly (1 Fig.1) from the vehicle.
-
Remove four screws separating the front plate from the operating assembly.
-
Remove the locking pin and spring and push the barrel (2 Fig.1) out from inside.
Refit in the reverse order of the removal procedure.