XJ-6 (X300) L6-4.0L (AJ16) (1996)
Carpet: Service and Repair
Removal of Stains - General Information
When carrying out any stain removal procedures, observe the following points:
-
Immediate action is essential if permanent staining is to be avoided.
-
Endeavour to clarify stain, ie water, oil, or combinations and treat accordingly.
-
Always work from the edge to the centre of the stain to prevent spreading.
-
Do not rub or agitate too vigourously as this action could distort or damage the pile.
-
Do not over-wet the carpet.
-
Do not over-apply cleaning solvent to foam-backed carpets as this could cause damage to the latex backing compounds.
-
When using more than one treatment on the same stain, allow adequate drying time between applications.
-
To remove excess moisture, cover the affected area with dry, undyed cloths, white paper towels, etc. and weight down; moisture removal is then
effected by capillary action.