XJ-6 (X300) L6-4.0L (AJ16) (1996)
Fig. 1
-
Open the console glove box lid.
-
Undo and remove the glove box lid checkarm to lid securing screw.
-
Reposition the checkarm.
-
Undo and remove the glove box/ashtray securing screws.
-
Carefully displace the ashtray upwards for access.
-
Displace and remove the ashtray lid catch.
-
Displace and reposition the glove box assembly.
-
Disconnect the security valet switch harness multi-plug.
-
Remove the glove box.
-
Place the glove box to the front.
-
Displace and remove the valet switch.
-
Displace and remove the glove box lid checkarm.
-
Displace and remove the glove box lid checkarm guide.
-
Place the glove box (Fig.1) aside.
Refit in the reverse order of the removal procedure.
Cupholder Assembly
Fig. 1
-
Remove the console glove box lid.
-
Undo and remove the inner lid securing screws.
-
Displace and remove the inner lid.
-
Open the cupholder.
-
Undo and remove the cupholder trim panel securing screws.
-
Displace and remove the trim panel assembly by releasing the lower edge and then displacing upwards.
-
Displace and reposition the cupholder assembly from base (upholder remains captive by spring).