XJ-6 (X300) L6-4.0L (AJ16) (1996)
Power Mirror Control Module: Description and Operation
The Column/Mirror Control Module (C/M CM) controls the operation of position adjustment motors by acting upon inputs from the relevant switches.
The module also forms an interface with signals from associated systems which affect column/mirror movement. The C/M CM works in conjunction with
Seat Control Module (SCM) and Security/Locking Control Module (SLCM) to provide positional adjustment memory functions as previously
described.
There are three connectors to the C/M CM single multi-pin socket, designated block A, B and C, which connect the various inputs/outputs and peripheral
devices to the module. Connections are as listed below.
Connector Pin Description (Part 1 of 4)
Connector Pin Description (Part 2 of 4)