XJ-6 (X300) L6-4.0L (AJ16) (1996)
Seat Heater: Description and Operation
Rear Seat
The cushion and squab heaters are regulated by in-line thermostats and operated by switches mounted on the central console switch pack. Operation of a
switch causes a timer circuit to energize the heater supply (for 11 minute ±1). The supply will remain on until timed out, although the heater circuit will
be broken by the thermostat if the set temperature is exceeded.
NOTE: Heating can only occur when the ignition switch is position II and the ambient temperature is below the thermostat pre-set value of 26 °C.
Rear Seat Adjustment System, Fig.1
1. Central rear seat switch console
2. RH Seat assembly
3. Rear seat control module (RSCM)
4. LH Seat assembly