XJ-6 (X300) L6-4.0L (AJ16) (1996)
/l6-4.0l_(aj16)/Page-400002.png)
5.
Install the camshaft cover and tighten the 13 retaining bolts "finger-tight."
6.
Final tighten the retaining bolts in the sequence shown in Illustration 2 Torque the bolts to 5 lb. ft. (6.5 Nm).
7.
Install new seals when reinstalling the "on-plug" ignition coils.
PARTS INFORMATION:
Refer to the Parts Microfiche.
WARRANTY INFORMATION:
