XJ-6 (X300) L6-4.0L (AJ16) (1996)
Auxiliary Shaft Seal: Service and Repair
Auxiliary Shaft Rear Seat, Renew
-
Remove the power assisted steering pump assembly.
-
Remove the pump drive coupling.
-
Remove the flanged bolt (1 Fig.1) and the drive-plate (2 Fig. 1).
-
Using Service Tool JD 118, remove the auxiliary shaft rear oil seal (3 Fig. 1) from its housing.
Note: Under no circumstances must the plastic insert be removed prior to fitting the seal.
-
Using Service Tool 18G 1469 fit and fully seat the auxiliary shaft oil seal.
-
Fit the power steering pump drive-plate and secure with its bolt.
-
Fit the power assisted steering pump assembly.