XJ-6 (X300) L6-4.0L (AJ16) (1996)
Clock: Service and Repair
RADIO CONSOLE, REMOVAL AND REPLACEMENT:
Fig. 1
NOTE: Other than Illumination Lamps, no individual components in Radio Console, including Clock, are serviceable. The entire console should be
replaced.
-
Remove the battery cover. Disconnect the battery.
-
Remove the console ashtray.
-
Remove console veneer panel. See: Body and Frame/Interior Moulding / Trim/Console
-
Remove the gear selector ident. plate securing screws.
-
Carefully reposition the radio console assembly from the mounted position.
-
Disconnect the assembly harness multi-plugs.
-
Disconnect the antenna coaxial connector.
-
Undo and remove the ground lead to radio securing nut.
-
Reposition the ground lead from radio stud.
-
Disconnect the radio harness multi-plugs.
-
Reposition the radio harness from the center console.
-
Displace the radio console assembly.
-
Remove the radio assembly from the console.
-
Remove the radio retaining plate.
-
Undo and remove the air conditioning control module securing screws.
-
Displace and remove the module.
-
Undo and remove switch/clock module securing screws.
-
Displace and remove the module assembly.
-
Place the radio console aside.
Refit in the reverse order of the removal procedure.