XJ-6 (X300) L6-4.0L (AJ16) (1996)
/l6-4.0l_(aj16)/Page-348003.png)
Fig.1 Sectional View Hub Assembly
Front Hub Service
FRONT HUB ASSEMBLY, RENEW
FRONT HUB BEARING END FLOAT CHECK AND ADJUST
FRONT HUB BEARING, RENEW
FRONT HUB OIL SEAL, RENEW
Disassemble
^
Disconnect vehicle battery ground lead.
^
Support the vehicle at the front and remove the appropriate road wheel (8)
^
Remove brake caliper and disc assemblies.
Note: Do not allow the caliper to hang by either harness or flexible hose.
Warning: DO NOT INHALE BRAKE PAD DUST, IT MAY DAMAGE YOUR HEALTH.
