jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Fuel System - Poor Hot Engine Starting|Page 2649 > < Diagram Information and Instructions|Page 2640
Page 1
background image

Fuel Tank Pressure Release Valve: All Technical Service Bulletins
Fuel System - Poor Hot Engine Starting

05.1-16

DATE
5/96

Sedan Range

MODEL
1995 MY-ON 
Sedan Range

VIN
720001-ON

Poor Hot Start - Tank Pressure Control Valve - Check Operation

ISSUE:
When investigating a customer complaint of poor "hot start" on 1995-96 MY Sedan Range vehicles within the above VIN range, verify that the fuel tank
pressure control valve (Rochester valve) is operating properly.

ACTION:
After verifying a customer complaint of poor "hot start" (extended cranking) on 1995-96 MY Sedan Range vehicles within the above VIN range, check
the fuel tank pressure control valve as follows:

1.

Raise vehicle on hoist.

2.

Disconnect the vacuum hose (illustration 1) from the control valve.

3.

Connect a vacuum tester to the pressure control valve fitting (illustration 1).

4.

Apply a vacuum of 14.7 in. Hg. (0.5 bar). If this vacuum cannot be held, the valve is faulty.

5.

Disconnect the vacuum tester from the control valve.

6.

If the valve retains vacuum, reconnect the vacuum hose and lower the vehicle.

7.

If the valve is faulty, loosen the retaining clip and disconnect the vent hose of fuel tank from the valve.

Fuel System - Poor Hot Engine Starting|Page 2649 > < Diagram Information and Instructions|Page 2640