XJ-6 (X300) L6-4.0L (AJ16) (1996)
/l6-4.0l_(aj16)/Page-928007.png)
Refer to the charts to determine the appropriate course of action.
Note:
In the case of customer brings to the dealer a vehicle that exhibits a drivability concern that the recall action does not eradicate, normal
diagnostic procedures can be followed as necessary to determine the root cause. The completion of any subsequent repairs are subject to
normal New Car Warranty or Select Edition Warranty, or customer pay authorization as appropriate.
Remove the ECM from the vehicle by the following procedure.
1.
Connect the WDS to the vehicle's data link connector.
2.
Record any diagnostic trouble codes stored in the ECM, then clear them from the system.
3.
Turn the ignition switch to 'off', wait 20 seconds before continuing with this procedure.
