XJ-6 (X300) L6-4.0L (AJ16) (1996)
Ignition Coil: Service and Repair
1. Open the hood and fit a wing cover.
Fig. 1
2. Remove the engine cover.
3. Disconnect the on-plug ignition coil multi-plug.
4. Undo and remove the on-plug ignition coil securing bolts.
5. Displace and remove the on-plug ignition coil. Remove and discard the gasket.
6. Clean the gasket face.
NOTE: Fitting a new on-plug ignition coil is the reverse of the removal procedure.