XJ-6L (X300) L6-4.0L (AJ16) (1997)
Arm Rest: Service and Repair
Armset Support, Renew
Fig. 1
Front door:
-
Remove front door trim pad veneer panel.
-
Remove upper trim pad and lower trim pad.
-
Using a suitable plastic knife, cut through the weather-shield to door sealant and reposition weathershield for access.
-
Drill out rivets and remove retaining screws from front and rear armrest support brackets.
-
Remove bracket.
Reardoor:
-
Remove front door trim pad veneer panel.
-
Remove upper trim pad and lower trim pad.
-
Remove door arm rest.
-
Using a suitable plastic knife, cut through the weather-shield to door sealant and reposition weathershield for access.
-
Drill out and remove arm rest rear mounting bracket securing pop rivets.
-
Remove bracket.
-
Drill out and remove arm rest front mounting bracket securing pop rivets.
-
Remove bracket (Fig.1).
Refit in the reverse order of the removal procedure.