XJ-6L (X300) L6-4.0L (AJ16) (1997)
Headliner: Service and Repair
-
Position front seats fully rearwards and recline the passenger seat squab.
-
Disconnect vehicle battery ground lead.
-
Remove:
-
Sliding roof flange (where fitted).
-
Front passenger door.
-
Rear console (where fitted).
-
Center console.
-
Sunblind and bezel.
-
Combined grab handle and coat hook.
-
Rear quarter upper trim pad LH & RH.
-
Cantrail crash roll.
-
Illuminated sun visor.
-
Roof console.
-
Release multi-plug connectors from clips at roof console aperture.
-
Remove roof console retaining clip from headlining.
-
Remove security sensors (where fitted) and disconnect multi-plugs.
-
Release roof lining to body tags and lower roof lining.
-
Remove the roof lining:
-
Position the roof lining with the rear corner through the passenger side rear door and the opposite corner through the driver side rear door.
-
Position the roof lining across the car with the roof console cut-out straddling 'B' - 'C' post.
-
Tip the roof lining forward against bottom of fascia with rear edge of roof lining diagonally across door aperture.
-
Carefully feed the roof lining out of the passenger side front door, easing the edge cut-outs over the door aperture and any other obstruction.
Refit in the reverse order of the removal procedure.