XJ-6L (X300) L6-4.0L (AJ16) (1997)
Door Lock Cylinder: Service and Repair
Fig. 1
-
Disconnect vehicle battery ground lead.
-
Remove the door trim veneer, door upper trim pad, door lower trim pad and door handle.
-
Remove the handle assembly to a clean workbench.
-
Remove the lock barrel from its bayonet type mounting.
-
Carefully remove the barrel components (Fig. 1) noting the order and position if reassembly is required.
Refit in the reverse order of the removal procedure. Ensure that the components are lightly greased.