XJ-6L (X300) L6-4.0L (AJ16) (1997)
Cowl: Service and Repair
Fig. 1
-
Open the hood and fit suitable fender cover.
-
Remove the wiper arm
-
Undo and remove the plenum chamber finisher securing screws (1 Fig. 1).
-
Displace and reposition the plenum chamber.
-
Disconnect the washer jet tubes.
-
Disconnect the washer jet multi-plugs.
-
Displace the washer jet securing tangs.
-
Displace and remove the washer jets (2 Fig. 1).
-
Place the finisher aside.
Refit in the reverse order of the removal procedure.