jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

ABOUT US
Rear Bumper Cover / Fascia > < Front Bumper Reinforcement|Service and Repair|Page 5750

XJ-8 Sedan (X308) V8-4.0L (AJ27) (1999)

Page 1
background image

Rear Bumper Bracket: Service and Repair

Removal

1. Remove rear bumper assembly.  See: Front Bumper/Service and Repair 
2. Remove four nuts securing strut to rear cross-member, remove strut from vehicle and discard gasket.

Installation

1. Position strut and new gasket on cross-member and fit and tighten securing nuts on studs.
2. Fit bumper assembly to struts.  See: Front Bumper/Service and Repair 

Rear Bumper Cover / Fascia > < Front Bumper Reinforcement|Service and Repair|Page 5750