XJ-8 Sedan (X308) V8-4.0L (AJ27) (1999)
Front Door Latch: Service and Repair
Driver Door Lock Mechanism
DRIVER DOOR LOCK MECHANISM
Removal
1. Remove battery cover and disconnect ground cable from battery terminal.
2. Remove driver door casing.
3. Position water shedder for access and feed door harness through water shedder.
4. Carefully remove water shedder from door and place adhesive side down on a clean dry plastic sheet.
5. Release door lock actuator harness multiplug from mounting bracket and disconnect multiplug.
6. Position plastic inner sheet for access.