XJ-8 Sedan (X308) V8-4.0L (AJ27) (1999)
Sunroof / Moonroof Module: Service and Repair
Sliding Roof Panel Control Module
SLIDING ROOF PANEL CONTROL MODULE
Removal
1. Remove cover from battery and disconnect ground cable from battery terminal.
2. Remove sliding roof trim panel for access.
3. Using a drive key or screwdriver in the motor gearbox slot, manually move the sliding roof towards the closed position.
4. Position the sliding roof with an 8 mm gap between the driven lever and the guide rail step.
5. Remove roof console for access.
6. Release sun visor from support and position at cantrail.
7. Remove visor support securing screw and remove support from header.