XJ-8 Sedan (X308) V8-4.0L (AJ27) (1999)
Headlamp Bulb: Service and Repair
Inner Headlamp Bulb
Inner Headlamp Bulb
Removal
1. Open hood and install fender cover.
2. Release headlamp bulb holder locking tangs and remove holder from headlamp.
3. CAUTION: If the bulb is to be re-fitted, the glass must not be touched with the bare hand. Failure to observe this caution will result in
premature bulb failure
Position bulb holder for access and remove bulb.
Installation
1. CAUTION: Headlamp bulbs are of the halogen type and must not be handled with bare hands. Failure to observe this caution will result
in premature bulb failure.
Install headlamp bulb in holder.
2. Install bulb holder in headlamp ensuring that securing tangs are fully seated.
3. Remove fender cover and close hood.