XJ-8 Sedan (X308) V8-4.0L (AJ27) (1999)
HARNESS CODE + GROUND EYELET NUMBER + EYELET DESIGNATION (SLR)
Eyelet designation
Two eyelet variations are used: a single eyelet and an eyelet pair. The single eyelet has a single "leg" and can be identified by the absence of a suffix.
The eyelet pair has two "legs," identified by the suffix L (left) or R (right).
Where the ground designation differs from LHD to RHD, the RHD ground is shown in parentheses. If the ground designation is the same for LHD and
RHD, only one ground designation is used.
NOTE: The XJ Series ground studs are not identified by code. Therefore, multiple eyelets with different harness codes may be connected to a ground
stud.
SCP Network
Due to circuit complexity and because space is limited, the SCP Network is, in most cases, shown as a broken grey line indicating that there is network
communication between the depicted control modules. Refer to Fig. 19.1 for circuit details. See: Diagrams/Electrical Diagrams
Connector Identification
The following connectors are the common harness-to-harness connectors used throughout the vehicle.