XJ-8 Sedan (X308) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1009002.png)
1. Raise front of vehicle.
2. Fully slacken adjuster nut of special tool 204-114 and position tool in center of road spring.
3. Lower front of vehicle.
4. WARNING: ENSURE THAT THE DOWEL OF TOOL 204-114 IS CORRECTLY POSITIONED ACROSS THE SUSPENSION
TURRET SLOT.
Locate special tool in suspension turret slot.
Pass special tool 204-114 through slot in suspension turret and rotate stem to locate dowel.
5. WARNING: WHEN TIGHTENING TOOL NUT, USE LOWER DOWEL AS A GUIDE TO ENSURE THAT THE TOOL STEM DOES
NOT ROTATE AND DISTURB POSITION OF DOWEL IN SUSPENSION TURRET.
