XJ-8 Sedan (X308) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-699001.png)
Seals and Gaskets: Service and Repair
Torque Converter Seal
Front Seal - Oil Pump
Special Service tools
307-357 Oil Seal Replacer
Removal
1. Remove the transmission unit.
2. Remove the torque converter from the transmission unit.
3. Remove the front pump seal.
Remove and discard the seal retaining snap-ring.
Using a 'Snap-on' oil seal puller, remove and discard the seal.
4. Clean the seal housing.
Installation
1. Installation is the reverse of the removal procedure.
2. Use tool 307-357 to install the seal.
